smart_streetlights/common/onvif/wsdl/authenticationbehavior.wsdl

<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="../../../ver20/util/onvif-wsdl-viewer.xsl"?>
<!--
Copyright (c) 2010-2018 by ONVIF: Open Network Video Interface Forum. All rights reserved.

Recipients of this document may copy, distribute, publish, or display this
document so long as this copyright notice, license and disclaimer are
retained with all copies of the document.

THIS DOCUMENT IS PROVIDED "AS IS," AND THE CORPORATION AND ITS MEMBERS AND
THEIR AFFILIATES, MAKE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE;
THAT THE CONTENTS OF THIS DOCUMENT ARE SUITABLE FOR ANY PURPOSE;
OR THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS.
IN NO EVENT WILL THE CORPORATION OR ITS MEMBERS OR THEIR AFFILIATES BE LIABLE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES, ARISING OUT OF OR RELATING TO ANY USE OR DISTRIBUTION OF THIS
DOCUMENT, WHETHER OR NOT (1) THE CORPORATION, MEMBERS OR THEIR AFFILIATES
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR (2) SUCH DAMAGES
WERE REASONABLY FORESEEABLE, AND ARISING OUT OF OR RELATING TO ANY USE OR
DISTRIBUTION OF THIS DOCUMENT.
THE FOREGOING DISCLAIMER AND LIMITATION ON LIABILITY DO NOT APPLY TO,
INVALIDATE, OR LIMIT REPRESENTATIONS AND WARRANTIES MADE BY THE MEMBERS
AND THEIR RESPECTIVE AFFILIATES TO THE CORPORATION AND OTHER MEMBERS IN
CERTAIN WRITTEN POLICIES OF THE CORPORATION.
-->
<wsdl:definitions name="AuthenticationBehaviorService"
				  targetNamespace="http://www.onvif.org/ver10/authenticationbehavior/wsdl"
				  xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
				  xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap12/"
				  xmlns:xs="http://www.w3.org/2001/XMLSchema"
				  xmlns:tab="http://www.onvif.org/ver10/authenticationbehavior/wsdl">
	<!-- The data types definition for the 'Authentication Behavior Service' -->
	<wsdl:types>
		<xs:schema targetNamespace="http://www.onvif.org/ver10/authenticationbehavior/wsdl"
				   xmlns:xs="http://www.w3.org/2001/XMLSchema"
				   xmlns:pt="http://www.onvif.org/ver10/pacs"
				   xmlns:tt="http://www.onvif.org/ver10/schema"
				   xmlns:tab="http://www.onvif.org/ver10/authenticationbehavior/wsdl"
				   elementFormDefault="qualified"
				   version="18.12">
			<xs:import namespace="http://www.onvif.org/ver10/pacs" schemaLocation="http://www.onvif.org/ver10/pacs/types.xsd"/>
			<xs:import namespace="http://www.onvif.org/ver10/schema" schemaLocation="http://www.onvif.org/ver10/schema/onvif.xsd"/>
			<!--ServiceCapabilities definitions-->
			<xs:complexType name="ServiceCapabilities">
				<xs:annotation>
					<xs:documentation>
						The service capabilities reflect optional functionality of a service. The information is static
						and does not change during device operation. The following capabilities are available:
					</xs:documentation>
				</xs:annotation>
				<xs:sequence>
					<xs:any namespace="##any" minOccurs="0" maxOccurs="unbounded" processContents="lax"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
				<xs:attribute name="MaxLimit" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							The maximum number of entries returned by a single Get&lt;Entity&gt;List or Get&lt;Entity&gt;
							request.
							The device shall never return more than this number of entities in a single response.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="MaxAuthenticationProfiles" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							Indicates the maximum number of authentication profiles the device supports. The device
							shall
							support at least one authentication profile.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="MaxPoliciesPerAuthenticationProfile" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							Indicates the maximum number of authentication policies per authentication profile supported
							by the device.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="MaxSecurityLevels" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							Indicates the maximum number of security levels the device supports. The device shall
							support at least one
							security level.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="MaxRecognitionGroupsPerSecurityLevel" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							Indicates the maximum number of recognition groups per security level supported by the
							device.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="MaxRecognitionMethodsPerRecognitionGroup" type="pt:PositiveInteger" use="required">
					<xs:annotation>
						<xs:documentation>
							Indicates the maximum number of recognition methods per recognition group supported by the
							device.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="ClientSuppliedTokenSupported" type="xs:boolean" default="false">
					<xs:annotation>
						<xs:documentation>
							Indicates that the client is allowed to supply the token when creating authentication
							profiles and
							security levels. To enable the use of the commands SetAuthenticationProfile and
							SetSecurityLevel, the
							value must be set to true.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="SupportedAuthenticationModes" type="tt:StringAttrList">
					<xs:annotation>
						<xs:documentation>
							A list of supported authentication modes (including custom modes).
							This field is optional, and when omitted, the client shall assume that the
							device supports "pt:SingleCredential" only.
						</xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:anyAttribute processContents="lax"/>
			</xs:complexType>
			<xs:element name="Capabilities" type="tab:ServiceCapabilities"/>
			<!-- End of definition -->
			<!--AuthenticationProfileInfo definitions-->
			<xs:complexType name="AuthenticationProfileInfo">
				<xs:annotation>
					<xs:documentation>
						The AuthenticationProfileInfo structure contains information of a specific authentication
						profile instance.
					</xs:documentation>
				</xs:annotation>
				<xs:complexContent>
					<xs:extension base="pt:DataEntity">
						<xs:sequence>
							<xs:element name="Name" type="pt:Name">
								<xs:annotation>
									<xs:documentation>
										A user readable name. It shall be up to 64 characters.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="Description" type="pt:Description" minOccurs="0">
								<xs:annotation>
									<xs:documentation>
										User readable description for the access profile. It shall be up
										to 1024 characters.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
						</xs:sequence>
					</xs:extension>
				</xs:complexContent>
			</xs:complexType>
			<!-- End of definition -->
			
			<!--AuthenticationProfile definitions-->
			<xs:complexType name="AuthenticationProfile">
				<xs:annotation>
					<xs:documentation>
						The AuthenticationProfile structure shall include all properties of the
						AuthenticationProfileInfo structure
						and also a default security level, an authentication mode, and a list of AuthenticationProfile
						instances.
					</xs:documentation>
				</xs:annotation>
				<xs:complexContent>
					<xs:extension base="tab:AuthenticationProfileInfo">
						<xs:sequence>
							<xs:element name="DefaultSecurityLevelToken" type="pt:ReferenceToken">
								<xs:annotation>
									<xs:documentation>
										The default security level is used if none of the authentication policies
										has a schedule covering the time of access (or if no authentication policies
										are defined).
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="AuthenticationPolicy" type="tab:AuthenticationPolicy"
										minOccurs="0" maxOccurs="unbounded">
								<xs:annotation>
									<xs:documentation>
										Each authentication policy associates a security level with a schedule (during
										which the specified security level will be required at the access point).
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="Extension" type="tab:AuthenticationProfileExtension" minOccurs="0"/>
						</xs:sequence>
						<xs:anyAttribute processContents="lax"/>
					</xs:extension>
				</xs:complexContent>
			</xs:complexType>
			<xs:complexType name="AuthenticationProfileExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of definition -->
			
			<!--AuthenticationPolicy definitions-->
			<xs:complexType name="AuthenticationPolicy">
				<xs:annotation>
					<xs:documentation>
						The authentication policy is an association of a security level and a schedule. It defines when
						a certain security level is required to grant access to a credential holder. Each security 
						level is given a unique priority. If authentication policies have overlapping schedules, 
						the security level with the highest priority is used.
					</xs:documentation>
				</xs:annotation>
				<xs:sequence>
					<xs:element name="ScheduleToken" type="pt:ReferenceToken">
						<xs:annotation>
							<xs:documentation>Reference to the schedule used by the authentication policy.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="SecurityLevelConstraint" type="tab:SecurityLevelConstraint" minOccurs="1" maxOccurs="unbounded">
						<xs:annotation>
							<xs:documentation>
								A list of security level constraint structures defining the conditions
								for what security level to use.
								Minimum one security level constraint must be specified.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="Extension" type="tab:AuthenticationPolicyExtension" minOccurs="0"/>
				</xs:sequence>
				<xs:anyAttribute processContents="lax"/>
			</xs:complexType>
			<xs:complexType name="AuthenticationPolicyExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of definition -->
			
			<!--SecurityLevelConstraint definitions-->
			<xs:complexType name="SecurityLevelConstraint">
				<xs:annotation>
					<xs:documentation>
						This structure defines what security level should be active depending on the state of the
						schedule.
					</xs:documentation>
				</xs:annotation>
				<xs:sequence>
					<xs:element name="ActiveRegularSchedule" type="xs:boolean">
						<xs:annotation>
							<xs:documentation>
								Corresponds to the Active field in the ScheduleState structure in
								[ONVIF Schedule Service Specification].
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="ActiveSpecialDaySchedule" type="xs:boolean">
						<xs:annotation>
							<xs:documentation>
								Corresponds to the SpecialDay field in the ScheduleState structure in
								[ONVIF Schedule Service Specification].
								This field will be ignored if the device do not support special days.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="AuthenticationMode" type="pt:Name" minOccurs="0" default="pt:SingleCredential">
						<xs:annotation>
							<xs:documentation>
								Defines the mode of authentication. Authentication modes starting with the prefix
								pt: are reserved to define ONVIF-specific authentication modes. For custom defined
								authentication modes, free text can be used.
								The following authentication modes are defined by ONVIF:
								pt:SingleCredential - Normal mode where only one credential holder is required to be granted access.
								pt:DualCredential - Two credential holders are required to be granted access
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="SecurityLevelToken" type="pt:ReferenceToken">
						<xs:annotation>
							<xs:documentation>
								Reference to the security level used by the authentication policy.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="Extension" type="tab:SecurityLevelConstraintExtension" minOccurs="0"/>
				</xs:sequence>
				<xs:anyAttribute processContents="lax"/>
			</xs:complexType>
			<xs:complexType name="SecurityLevelConstraintExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of definition -->
			
			<!--RecognitionMethod definitions-->
			<xs:complexType name="RecognitionMethod">
				<xs:annotation>
					<xs:documentation>
						Recognition is the action of identifying authorized users requesting access by the comparison of
						presented
						credential data with recorded credential data. A recognition method is either memorized,
						biometric or held
						within a physical credential. A recognition type is either a recognition method or a physical
						input such as
						a request-to-exit button.
					</xs:documentation>
				</xs:annotation>
				<xs:sequence>
					<xs:element name="RecognitionType" type="xs:string">
						<xs:annotation>
							<xs:documentation>The requested type of recognition.</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="Order" type="xs:int">
						<xs:annotation>
							<xs:documentation>
								The order value defines when this recognition method will be requested in relation 
								to the other recognition methods in the same security level. A lower number indicates 
								that the recognition method will be requested before recognition methods with a higher number.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="Extension" type="tab:RecognitionMethodExtension" minOccurs="0"/>
				</xs:sequence>
				<xs:anyAttribute processContents="lax"/>
			</xs:complexType>
			<xs:complexType name="RecognitionMethodExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of definition -->
			<!--RecognitionGroup definitions-->
			<xs:complexType name="RecognitionGroup">
				<xs:annotation>
					<xs:documentation>
					</xs:documentation>
				</xs:annotation>
				<xs:sequence>
					<xs:element name="RecognitionMethod" type="tab:RecognitionMethod"
								minOccurs="0" maxOccurs="unbounded">
						<xs:annotation>
							<xs:documentation>A list of recognition methods to request for at the access point.
							</xs:documentation>
						</xs:annotation>
					</xs:element>
					<xs:element name="Extension" type="tab:RecognitionGroupExtension" minOccurs="0"/>
				</xs:sequence>
				<xs:anyAttribute processContents="lax"/>
			</xs:complexType>
			<xs:complexType name="RecognitionGroupExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of definition -->
			<!--SecurityLevelInfo definitions-->
			<xs:complexType name="SecurityLevelInfo">
				<xs:annotation>
					<xs:documentation>
						The SecurityLevelInfo structure contains information of a specific security level instance.
					</xs:documentation>
				</xs:annotation>
				<xs:complexContent>
					<xs:extension base="pt:DataEntity">
						<xs:sequence>
							<xs:element name="Name" type="pt:Name">
								<xs:annotation>
									<xs:documentation>
										A user readable name. It shall be up to 64 characters.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="Priority" type="xs:int">
								<xs:annotation>
									<xs:documentation>
										A higher number indicates that the security level is considered more secure
										than security levels with lower priorities. The priority is used when an
										authentication profile have overlapping schedules with different security
										levels. When an access point is accessed, the authentication policies are
										walked through in priority order (highest priority first). When a schedule is
										found covering the time of access, the associated security level is used and
										processing stops. Two security levels cannot have the same priority.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="Description" type="pt:Description" minOccurs="0">
								<xs:annotation>
									<xs:documentation>
										User readable description for the access profile. It shall be up
										to 1024 characters.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
						</xs:sequence>
					</xs:extension>
				</xs:complexContent>
			</xs:complexType>
			<!-- End of definition -->
			<!--SecurityLevel definitions-->
			<xs:complexType name="SecurityLevel">
				<xs:annotation>
					<xs:documentation>
						The SecurityLevel structure shall include all properties of the SecurityLevelInfo structure and
						also a set
						of recognition groups.

						The recognition groups are used to define a logical OR between the groups. Each recognition
						group consists
						of one or more recognition methods.
					</xs:documentation>
				</xs:annotation>
				<xs:complexContent>
					<xs:extension base="tab:SecurityLevelInfo">
						<xs:sequence>
							<xs:element name="RecognitionGroup" type="tab:RecognitionGroup"
										minOccurs="0" maxOccurs="unbounded">
								<xs:annotation>
									<xs:documentation>
										The recognition groups are used to define a logical OR between the groups. Each
										recognition group consists of one or more recognition methods.
									</xs:documentation>
								</xs:annotation>
							</xs:element>
							<xs:element name="Extension" type="tab:SecurityLevelExtension" minOccurs="0"/>
						</xs:sequence>
						<xs:anyAttribute processContents="lax"/>
					</xs:extension>
				</xs:complexContent>
			</xs:complexType>
			<xs:complexType name="SecurityLevelExtension">
				<xs:sequence>
					<xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>   <!-- first ONVIF then Vendor -->
				</xs:sequence>
			</xs:complexType>
			<!-- End of data types definition -->
			<!-- #################-->
			<!-- Message request / response elements-->
			<xs:element name="GetServiceCapabilities">
				<xs:complexType>
					<xs:sequence/>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetServiceCapabilitiesResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Capabilities" type="tab:ServiceCapabilities">
							<xs:annotation>
								<xs:documentation>The capability response message contains the requested access rules
									service capabilities using a hierarchical XML capability structure.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileInfo">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken" minOccurs="1" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>Tokens of AuthenticationProfileInfo items to get.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileInfoResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="AuthenticationProfileInfo" type="tab:AuthenticationProfileInfo" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of AuthenticationProfileInfo items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileInfoList">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Limit" type="xs:int" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Maximum number of entries to return. If not specified, less than one
									or higher than what the device supports, the number of items is determined by the
									device.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="StartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Start returning entries from this start reference. If not specified,
									entries shall start from the beginning of the dataset.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileInfoListResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="NextStartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>StartReference to use in next call to get the following items. If
									absent, no more items to get.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="AuthenticationProfileInfo" type="tab:AuthenticationProfileInfo" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of AuthenticationProfileInfo items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfiles">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken" minOccurs="1" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>Tokens of AuthenticationProfile items to get.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfilesResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="AuthenticationProfile" type="tab:AuthenticationProfile" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of AuthenticationProfile items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileList">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Limit" type="xs:int" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Maximum number of entries to return. If not specified, less than one
									or higher than what the device supports, the number of items is determined by the
									device.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="StartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Start returning entries from this start reference. If not specified,
									entries shall start from the beginning of the dataset.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetAuthenticationProfileListResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="NextStartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>StartReference to use in next call to get the following items. If
									absent, no more items to get.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="AuthenticationProfile" type="tab:AuthenticationProfile" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of AuthenticationProfile items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="CreateAuthenticationProfile">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="AuthenticationProfile" type="tab:AuthenticationProfile">
							<xs:annotation>
								<xs:documentation>The AuthenticationProfile to create.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="CreateAuthenticationProfileResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken">
							<xs:annotation>
								<xs:documentation>The Token of created AuthenticationProfile.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="SetAuthenticationProfile">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="AuthenticationProfile" type="tab:AuthenticationProfile">
							<xs:annotation>
								<xs:documentation>The AuthenticationProfile to create or modify.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="SetAuthenticationProfileResponse">
				<xs:complexType>
					<xs:sequence>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="ModifyAuthenticationProfile">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="AuthenticationProfile" type="tab:AuthenticationProfile">
							<xs:annotation>
								<xs:documentation>The AuthenticationProfile to modify.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="ModifyAuthenticationProfileResponse">
				<xs:complexType>
					<xs:sequence>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="DeleteAuthenticationProfile">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken">
							<xs:annotation>
								<xs:documentation>The token of the AuthenticationProfile to delete.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="DeleteAuthenticationProfileResponse">
				<xs:complexType>
					<xs:sequence/>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelInfo">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken" minOccurs="1" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>Tokens of SecurityLevelInfo items to get.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelInfoResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="SecurityLevelInfo" type="tab:SecurityLevelInfo" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of SecurityLevelInfo items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelInfoList">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Limit" type="xs:int" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Maximum number of entries to return. If not specified, less than one
									or higher than what the device supports, the number of items is determined by the
									device.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="StartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Start returning entries from this start reference. If not specified,
									entries shall start from the beginning of the dataset.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelInfoListResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="NextStartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>StartReference to use in next call to get the following items. If
									absent, no more items to get.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="SecurityLevelInfo" type="tab:SecurityLevelInfo" minOccurs="0"
									maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of SecurityLevelInfo items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevels">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken" minOccurs="1" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>Tokens of SecurityLevel items to get.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelsResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="SecurityLevel" type="tab:SecurityLevel" minOccurs="0" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of SecurityLevel items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelList">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Limit" type="xs:int" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Maximum number of entries to return. If not specified, less than one
									or higher than what the device supports, the number of items is determined by the
									device.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="StartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>Start returning entries from this start reference. If not specified,
									entries shall start from the beginning of the dataset.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="GetSecurityLevelListResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="NextStartReference" type="xs:string" minOccurs="0">
							<xs:annotation>
								<xs:documentation>StartReference to use in next call to get the following items. If
									absent, no more items to get.
								</xs:documentation>
							</xs:annotation>
						</xs:element>
						<xs:element name="SecurityLevel" type="tab:SecurityLevel" minOccurs="0" maxOccurs="unbounded">
							<xs:annotation>
								<xs:documentation>List of SecurityLevel items.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="CreateSecurityLevel">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="SecurityLevel" type="tab:SecurityLevel">
							<xs:annotation>
								<xs:documentation>The SecurityLevel to create.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="CreateSecurityLevelResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken">
							<xs:annotation>
								<xs:documentation>The Token of created SecurityLevel.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="SetSecurityLevel">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="SecurityLevel" type="tab:SecurityLevel">
							<xs:annotation>
								<xs:documentation>The SecurityLevel to create or modify.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="SetSecurityLevelResponse">
				<xs:complexType>
					<xs:sequence>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="ModifySecurityLevel">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="SecurityLevel" type="tab:SecurityLevel">
							<xs:annotation>
								<xs:documentation>The SecurityLevel to modify.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="ModifySecurityLevelResponse">
				<xs:complexType>
					<xs:sequence>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="DeleteSecurityLevel">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="Token" type="pt:ReferenceToken">
							<xs:annotation>
								<xs:documentation>The token of the SecurityLevel to delete.</xs:documentation>
							</xs:annotation>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<!--===============================-->
			<xs:element name="DeleteSecurityLevelResponse">
				<xs:complexType>
					<xs:sequence/>
				</xs:complexType>
			</xs:element>
			<!-- #################-->
		</xs:schema>
	</wsdl:types>
	<!--Definition of 'GetServiceCapabilities' message-->
	<wsdl:message name="GetServiceCapabilitiesRequest">
		<wsdl:part name="parameters" element="tab:GetServiceCapabilities"/>
	</wsdl:message>
	<wsdl:message name="GetServiceCapabilitiesResponse">
		<wsdl:part name="parameters" element="tab:GetServiceCapabilitiesResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetAuthenticationProfileInfo' message-->
	<wsdl:message name="GetAuthenticationProfileInfoRequest">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileInfo"/>
	</wsdl:message>
	<wsdl:message name="GetAuthenticationProfileInfoResponse">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileInfoResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetAuthenticationProfileInfoList' message-->
	<wsdl:message name="GetAuthenticationProfileInfoListRequest">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileInfoList"/>
	</wsdl:message>
	<wsdl:message name="GetAuthenticationProfileInfoListResponse">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileInfoListResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetAuthenticationProfiles' message-->
	<wsdl:message name="GetAuthenticationProfilesRequest">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfiles"/>
	</wsdl:message>
	<wsdl:message name="GetAuthenticationProfilesResponse">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfilesResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetAuthenticationProfileList' message-->
	<wsdl:message name="GetAuthenticationProfileListRequest">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileList"/>
	</wsdl:message>
	<wsdl:message name="GetAuthenticationProfileListResponse">
		<wsdl:part name="parameters" element="tab:GetAuthenticationProfileListResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'CreateAuthenticationProfile' message-->
	<wsdl:message name="CreateAuthenticationProfileRequest">
		<wsdl:part name="parameters" element="tab:CreateAuthenticationProfile"/>
	</wsdl:message>
	<wsdl:message name="CreateAuthenticationProfileResponse">
		<wsdl:part name="parameters" element="tab:CreateAuthenticationProfileResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'SetAuthenticationProfile' message-->
	<wsdl:message name="SetAuthenticationProfileRequest">
		<wsdl:part name="parameters" element="tab:SetAuthenticationProfile"/>
	</wsdl:message>
	<wsdl:message name="SetAuthenticationProfileResponse">
		<wsdl:part name="parameters" element="tab:SetAuthenticationProfileResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'ModifyAuthenticationProfile' message-->
	<wsdl:message name="ModifyAuthenticationProfileRequest">
		<wsdl:part name="parameters" element="tab:ModifyAuthenticationProfile"/>
	</wsdl:message>
	<wsdl:message name="ModifyAuthenticationProfileResponse">
		<wsdl:part name="parameters" element="tab:ModifyAuthenticationProfileResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'DeleteAuthenticationProfile' message-->
	<wsdl:message name="DeleteAuthenticationProfileRequest">
		<wsdl:part name="parameters" element="tab:DeleteAuthenticationProfile"/>
	</wsdl:message>
	<wsdl:message name="DeleteAuthenticationProfileResponse">
		<wsdl:part name="parameters" element="tab:DeleteAuthenticationProfileResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetSecurityLevelInfo' message-->
	<wsdl:message name="GetSecurityLevelInfoRequest">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelInfo"/>
	</wsdl:message>
	<wsdl:message name="GetSecurityLevelInfoResponse">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelInfoResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetSecurityLevelInfoList' message-->
	<wsdl:message name="GetSecurityLevelInfoListRequest">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelInfoList"/>
	</wsdl:message>
	<wsdl:message name="GetSecurityLevelInfoListResponse">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelInfoListResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetSecurityLevels' message-->
	<wsdl:message name="GetSecurityLevelsRequest">
		<wsdl:part name="parameters" element="tab:GetSecurityLevels"/>
	</wsdl:message>
	<wsdl:message name="GetSecurityLevelsResponse">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelsResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'GetSecurityLevelList' message-->
	<wsdl:message name="GetSecurityLevelListRequest">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelList"/>
	</wsdl:message>
	<wsdl:message name="GetSecurityLevelListResponse">
		<wsdl:part name="parameters" element="tab:GetSecurityLevelListResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'CreateSecurityLevel' message-->
	<wsdl:message name="CreateSecurityLevelRequest">
		<wsdl:part name="parameters" element="tab:CreateSecurityLevel"/>
	</wsdl:message>
	<wsdl:message name="CreateSecurityLevelResponse">
		<wsdl:part name="parameters" element="tab:CreateSecurityLevelResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'SetSecurityLevel' message-->
	<wsdl:message name="SetSecurityLevelRequest">
		<wsdl:part name="parameters" element="tab:SetSecurityLevel"/>
	</wsdl:message>
	<wsdl:message name="SetSecurityLevelResponse">
		<wsdl:part name="parameters" element="tab:SetSecurityLevelResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'ModifySecurityLevel' message-->
	<wsdl:message name="ModifySecurityLevelRequest">
		<wsdl:part name="parameters" element="tab:ModifySecurityLevel"/>
	</wsdl:message>
	<wsdl:message name="ModifySecurityLevelResponse">
		<wsdl:part name="parameters" element="tab:ModifySecurityLevelResponse"/>
	</wsdl:message>
	<!--===============================-->
	<!--Definition of 'DeleteSecurityLevel' message-->
	<wsdl:message name="DeleteSecurityLevelRequest">
		<wsdl:part name="parameters" element="tab:DeleteSecurityLevel"/>
	</wsdl:message>
	<wsdl:message name="DeleteSecurityLevelResponse">
		<wsdl:part name="parameters" element="tab:DeleteSecurityLevelResponse"/>
	</wsdl:message>
	<!--===============================-->
	<wsdl:portType name="AuthenticationBehaviorPort">
		<wsdl:operation name="GetServiceCapabilities">
			<wsdl:documentation>This operation returns the capabilities of the authentication behavior service.
			</wsdl:documentation>
			<wsdl:input message="tab:GetServiceCapabilitiesRequest"/>
			<wsdl:output message="tab:GetServiceCapabilitiesResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileInfo">
			<wsdl:documentation>
				This operation requests a list of AuthenticationProfileInfo items matching the given tokens.
				The device shall ignore tokens it cannot resolve and shall return an empty list if there are no items
				matching the specified tokens. The device shall not return a fault in this case.
			</wsdl:documentation>
			<wsdl:input message="tab:GetAuthenticationProfileInfoRequest"/>
			<wsdl:output message="tab:GetAuthenticationProfileInfoResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileInfoList">
			<wsdl:documentation>
				This operation requests a list of all of AuthenticationProfileInfo items provided by the device.
				A call to this method shall return a StartReference when not all data is returned and more data is
				available. The reference shall be valid for retrieving the next set of data. Please refer Access Control
				Service Specification for more details.
				The number of items returned shall not be greater than Limit parameter.
			</wsdl:documentation>
			<wsdl:input message="tab:GetAuthenticationProfileInfoListRequest"/>
			<wsdl:output message="tab:GetAuthenticationProfileInfoListResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfiles">
			<wsdl:documentation>
				This operation returns the specified AuthenticationProfile item matching the given tokens.
				The device shall ignore tokens it cannot resolve and shall return an empty list if there are no items
				matching specified tokens. The device shall not return a fault in this case.
			</wsdl:documentation>
			<wsdl:input message="tab:GetAuthenticationProfilesRequest"/>
			<wsdl:output message="tab:GetAuthenticationProfilesResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileList">
			<wsdl:documentation>
				This operation requests a list of all of AuthenticationProfile items provided by the device.
				A call to this method shall return a StartReference when not all data is returned and more data is
				available. The reference shall be valid for retrieving the next set of data. Please refer Access Control
				Service Specification for more details.
				The number of items returned shall not be greater the Limit parameter.
			</wsdl:documentation>
			<wsdl:input message="tab:GetAuthenticationProfileListRequest"/>
			<wsdl:output message="tab:GetAuthenticationProfileListResponse"/>
		</wsdl:operation>
		<wsdl:operation name="CreateAuthenticationProfile">
			<wsdl:documentation>
				This operation creates the specified authentication profile in the device.
				The token field of the AuthenticationProfile structure shall be empty and the device shall allocate a
				token for the authentication profile. The allocated token shall be returned in the response.
				If the client sends any value in the token field, the device shall return InvalidArgVal as a generic
				fault code.
			</wsdl:documentation>
			<wsdl:input message="tab:CreateAuthenticationProfileRequest"/>
			<wsdl:output message="tab:CreateAuthenticationProfileResponse"/>
		</wsdl:operation>
		<wsdl:operation name="SetAuthenticationProfile">
			<wsdl:documentation>
				This method is used to synchronize an authentication profile in a client with the device.
				If an authentication profile with the specified token does not exist in the device, the authentication
				profile is
				created. If an authentication profile with the specified token exists, then the authentication profile
				is modified.
				A call to this method takes an AuthenticationProfile structure as input parameter. The token field of
				the
				AuthenticationProfile shall not be empty.
				A device that signals support for the ClientSuppliedTokenSupported capability shall implement this
				command.
			</wsdl:documentation>
			<wsdl:input message="tab:SetAuthenticationProfileRequest"/>
			<wsdl:output message="tab:SetAuthenticationProfileResponse"/>
		</wsdl:operation>
		<wsdl:operation name="ModifyAuthenticationProfile">
			<wsdl:documentation>
				This operation modifies the specified authentication profile.
				The token of the authentication profile to modify is specified in the token field of the
				AuthenticationProfile
				structure and shall not be empty. All other fields in the structure shall overwrite the fields in the
				specified authentication profile.
			</wsdl:documentation>
			<wsdl:input message="tab:ModifyAuthenticationProfileRequest"/>
			<wsdl:output message="tab:ModifyAuthenticationProfileResponse"/>
		</wsdl:operation>
		<wsdl:operation name="DeleteAuthenticationProfile">
			<wsdl:documentation>
				This operation deletes the specified authentication profile.
				If the authentication profile is deleted, all authentication policies associated with the authentication
				profile
				will also be deleted.
				If it is associated with one or more entities some devices may not be able to delete the authentication
				profile,
				and consequently a ReferenceInUse fault shall be generated.
			</wsdl:documentation>
			<wsdl:input message="tab:DeleteAuthenticationProfileRequest"/>
			<wsdl:output message="tab:DeleteAuthenticationProfileResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelInfo">
			<wsdl:documentation>
				This operation requests a list of SecurityLevelInfo items matching the given tokens.
				The device shall ignore tokens it cannot resolve and shall return an empty list if there are no items
				matching the specified tokens. The device shall not return a fault in this case.
			</wsdl:documentation>
			<wsdl:input message="tab:GetSecurityLevelInfoRequest"/>
			<wsdl:output message="tab:GetSecurityLevelInfoResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelInfoList">
			<wsdl:documentation>
				This operation requests a list of all of SecurityLevelInfo items provided by the device.
				A call to this method shall return a StartReference when not all data is returned and more data is
				available. The reference shall be valid for retrieving the next set of data. Please refer Access Control
				Service Specification for more details.
				The number of items returned shall not be greater than Limit parameter.
			</wsdl:documentation>
			<wsdl:input message="tab:GetSecurityLevelInfoListRequest"/>
			<wsdl:output message="tab:GetSecurityLevelInfoListResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevels">
			<wsdl:documentation>
				This operation returns the specified SecurityLevel item matching the given tokens.
				The device shall ignore tokens it cannot resolve and shall return an empty list if there are no items
				matching specified tokens. The device shall not return a fault in this case.
			</wsdl:documentation>
			<wsdl:input message="tab:GetSecurityLevelsRequest"/>
			<wsdl:output message="tab:GetSecurityLevelsResponse"/>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelList">
			<wsdl:documentation>
				This operation requests a list of all of SecurityLevel items provided by the device.
				A call to this method shall return a StartReference when not all data is returned and more data is
				available. The reference shall be valid for retrieving the next set of data. Please refer Access Control
				Service Specification for more details.
				The number of items returned shall not be greater the Limit parameter.
			</wsdl:documentation>
			<wsdl:input message="tab:GetSecurityLevelListRequest"/>
			<wsdl:output message="tab:GetSecurityLevelListResponse"/>
		</wsdl:operation>
		<wsdl:operation name="CreateSecurityLevel">
			<wsdl:documentation>
				This operation creates the specified security level in the device.
				The token field of the SecurityLevel structure shall be empty and the device shall allocate a
				token for the security level. The allocated token shall be returned in the response.
				If the client sends any value in the token field, the device shall return InvalidArgVal as a generic
				fault code.
			</wsdl:documentation>
			<wsdl:input message="tab:CreateSecurityLevelRequest"/>
			<wsdl:output message="tab:CreateSecurityLevelResponse"/>
		</wsdl:operation>
		<wsdl:operation name="SetSecurityLevel">
			<wsdl:documentation>
				This method is used to synchronize an security level in a client with the device.
				If an security level with the specified token does not exist in the device, the security level is
				created. If an security level with the specified token exists, then the security level is modified.
				A call to this method takes an SecurityLevel structure as input parameter. The token field of the
				SecurityLevel shall not be empty.
				A device that signals support for the ClientSuppliedTokenSupported capability shall implement this
				command.
			</wsdl:documentation>
			<wsdl:input message="tab:SetSecurityLevelRequest"/>
			<wsdl:output message="tab:SetSecurityLevelResponse"/>
		</wsdl:operation>
		<wsdl:operation name="ModifySecurityLevel">
			<wsdl:documentation>
				This operation modifies the specified security level.
				The token of the security level to modify is specified in the token field of the SecurityLevel
				structure and shall not be empty. All other fields in the structure shall overwrite the fields in the
				specified security level.
			</wsdl:documentation>
			<wsdl:input message="tab:ModifySecurityLevelRequest"/>
			<wsdl:output message="tab:ModifySecurityLevelResponse"/>
		</wsdl:operation>
		<wsdl:operation name="DeleteSecurityLevel">
			<wsdl:documentation>
				This operation deletes the specified security level.
				If the security level is deleted, all authentication policies associated with the security level
				will also be deleted.
				If it is associated with one or more entities some devices may not be able to delete the security level,
				and consequently a ReferenceInUse fault shall be generated.
			</wsdl:documentation>
			<wsdl:input message="tab:DeleteSecurityLevelRequest"/>
			<wsdl:output message="tab:DeleteSecurityLevelResponse"/>
		</wsdl:operation>
	</wsdl:portType>
	<!--Protocol & data format for the operations and messages for the port type 'AuthenticationBehaviorPort'-->
	<wsdl:binding name="AuthenticationBehaviorBinding" type="tab:AuthenticationBehaviorPort">
		<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
		<wsdl:operation name="GetServiceCapabilities">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetServiceCapabilities"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileInfo">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetAuthenticationProfileInfo"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileInfoList">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetAuthenticationProfileInfoList"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfiles">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetAuthenticationProfiles"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetAuthenticationProfileList">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetAuthenticationProfileList"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="CreateAuthenticationProfile">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/CreateAuthenticationProfile"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="SetAuthenticationProfile">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/SetAuthenticationProfile"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="ModifyAuthenticationProfile">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/ModifyAuthenticationProfile"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="DeleteAuthenticationProfile">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/DeleteAuthenticationProfile"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelInfo">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetSecurityLevelInfo"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelInfoList">
			<soap:operation
					soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetSecurityLevelInfoList"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevels">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetSecurityLevels"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="GetSecurityLevelList">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/GetSecurityLevelList"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="CreateSecurityLevel">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/CreateSecurityLevel"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="SetSecurityLevel">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/SetSecurityLevel"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="ModifySecurityLevel">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/ModifySecurityLevel"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
		<wsdl:operation name="DeleteSecurityLevel">
			<soap:operation soapAction="http://www.onvif.org/ver10/authenticationbehavior/wsdl/DeleteSecurityLevel"/>
			<wsdl:input>
				<soap:body use="literal"/>
			</wsdl:input>
			<wsdl:output>
				<soap:body use="literal"/>
			</wsdl:output>
		</wsdl:operation>
	</wsdl:binding>
</wsdl:definitions>